Performance of a gas turbine is mainly depends on the inlet air temperature. The power output of a gas turbine depends on the mass flow rate of air. Now days the atmosphere temperature is hot, so the air is less density, the mass flow rate will reduce and automatically the power output will reduce. A reduce of 1°C temperature of inlet air increases the power output by approximately 0.7MW. To re...

Air may be dehumidified when it is brought into contact with a suitable liquid desiccant. Different types of liquid desiccants are available in the market and the application of the proper desiccant in hot humid climates would improve the dehumidification effectiveness. The driving potential for a dehumidification process is the difference in the pressure of the water vapor in the air and the w...

This study aims to optimize extraction and drying conditions of fig syrup. Drying was done in a pilot scale two-fluid nozzle spray dryer. A total of 27 experiments were conducted with varying inlet air temperatures, air flow rates, and also a maltodextrin (MD)- low methoxyl pectin (LMP) ratios. While feed rate, feed temperature, and compressed air flow rate of the atomizer were kept constant. T...

The shape of the air flow in the interior is heavily influenced by the air distribution system and the way air enters and exits. By numerically simulating flow by computational fluid dynamics, one can determine the flow pattern and temperature distribution and, with the help of the results, provide an optimal design of the air conditioning system. In this study, a chamber was first constructed ...

Spray drying is a common drying technique in food industries to convert liquid to powder form. A good understanding on the dynamic behavior of the process is important to ensure proper control. The aim of this study is to develop empirical models for spray drying of whole milk powder and orange juice powder. A preliminary study on the effect of several inputs such as inlet air temperature, feed...

different control strategies of bed temperature and moisture were investigated using various inlet air temperatures and air fluxes in both the ordinary packed bed bioreactor (without cooling water in the jacket) and the bioreactor with cooling water in jacket. the experiments were carried out within a 1-l solid-state packed bed bioreactor in which aspergillus niger was cultivated on wheat bran....

black tea sample was dried by a vibro-fluidized bed dryer to find its aerodynamic behavior and thermal performance during drying. the drying experiments were conducted at three different inlet air temperatures of 100, 115 and 130°c and fluidization condition at five vibration intensity levels of 0 (no vibration), 0.063, 0.189, 0.395 and 1.184. the results showed that bed channeling and defluidi...

A semi-empirical model for simulating thermal and energy performance of an automotive air-conditioning (AAC) system in passenger vehicles has been developed. The model consists of two sections, namely empirical evaporator correlations and dynamic load simulation. The correlations used consider sensible and latent heat transfer performance of the evaporator coil. The correlations were obtained f...

Frost formation on an evaporator causes significant problems by decreasing inlet air flow. It is important for a precise prediction to understand the dominant factor of the frost formation. In this paper, the frost layer on the cold plate is experimentally obtained with different velocities while maintaining a surface temperature at -20 degrees Celsius. The mass and height of the frost layer is...

The paper examines the effect of the solar chimney’s stack height, depth, width and inlet position on the interior performance (air temperature and speed at 1.20 m height above the ground) as well as proposes an optimal tropical solar chimney design. Simulations show that the output air temperature remains constant while the solar chimney’s width is the most significant factor influencing outpu...